Moisture problems and water damage might happen anytime if precipitation and heavy rain flow towards your house. In addition to that, poor drainage can also result in one of the worst nightmares a homeowner can have – heavy flooding. 

Because of this, it is crucial that you grade your yard properly right away. This process will help you achieve proper drainage.  

Today, we’re going to share with you some tips on how to properly grade your yard. If you don’t know how to use a final grading calculator, you can always hire a professional grading company. 

Grading or leveling the yard in your house needs quite an extensive amount of labor. You’ve got to ensure you call a professional if you are not experienced or skilled enough to do it.  

Check and Plan for Possible Issues 

You should conduct a complete assessment and planning of your yard and home before you proceed with the project.  

  • Order the right amount of dirt. It is a lot better to order in bulk since you may require more during the process. 
  • Recognize the closest drainage area in your property that you would like the water to flow. 
  • Make utility lines such as electric, telephone, gas, and water lines. These marks will stop you from hitting them during the process of digging.  
  • Examine every pipe and create window wells for basement windows. 
  • Refer to the guidelines of digging in your local area. Then, get the required permits.  

Look for the Low and High Points 

As you walk around and check your property, you can mark, measure, and determine the lowest and highest points in your lawn. This will help you understand how much slope you’ve got.  

There are a couple of reminders you’ve got to keep in mind when marking the low and high points.  

  • The maximum slope of a lawn needs to be 12 inches for every 4 feet. 
  • The ground needs to slope away from the foundation of your house in every direction. It should drop at least 2-3 inches for every 10 feet.  

Figure Out the Level Grade Line 

After you have marked the low and high points, you’ve got to establish the level grade line. This will help you understand how much leveling job you’ve got to perform. The level grade line consists of the vertical distance and horizontal distance.  

To get the vertical distance, you’ve got to measure the stake at your lowest point all the way from the string to the ground.  

When it comes to horizontal distance, you can measure it by placing a single stake at every lowest and highest point. Connect the two stakes using a string at a perfect level. Next, measure it.  

Fill Dirt at the Low Point 

Next, use the dirt that you’ve got. Fill the piles of dirt using a wheelbarrow. Make sure you fill the low points.  

The objective here is to stop water from infiltrating your home. Thus, you’ve got to ensure you fill dirt against the foundation and taller than the slope. Use a rake to smooth and level the ground